Search results for : laboratory

lab equipment malaysia

How to Take Care of Laboratory Equipment

Scientific Equipments
Photo: Scientific Equipments (Google)

Taking care of laboratory equipment is one of the daily tasks that must be performed to keep the equipment in excellent condition and to guarantee that tests run smoothly and efficiently. For the first step in caring for laboratory equipment, please refer to the next section.

If your laboratory equipment is clean and ready for use, the danger of cross-contamination is likely to increase the significance of your work, making it almost as significant as the research itself. In addition, excellent lab maintenance has other advantages. This equipment is one of the most expensive items in the laboratory, so choose wisely (thus preventing unnecessary re-purchases).

Listed here are the procedures for cleaning laboratory equipment.

1. Normal Maintenance

Lab cleaning is one of the simplest, most economical, and most obvious methods to maintain your lab in excellent condition and functional, but it’s something we all miss, so here are some recommendations on how to do it. Following easy cleaning measures will maintain the equipment’s pristine state, ensuring that your laboratory operates without a hitch. It is advisable to wipe exposed surfaces everyday and to arrange a thorough cleaning once per week.

2. Calibration

Inaccurate data can result from a failure to frequently calibrate equipment, an omission that could ultimately halt the investigation. In laboratories where dangerous chemicals are utilised, accurate calibration can also increase safety. Consequentially, it is crucial that the procedure be executed consistently. A range of services are provided to guarantee that your equipment is calibrated on a regular basis and performing to the appropriate quality.

3. Repair

Over time, lab equipment will deteriorate and become inoperable. However, before discarding the damaged equipment, check to see whether it can be fixed or if its components can be replaced.

You may be startled to learn that equipment may be upgraded and maintained rather than just discarded.

Especially for bigger products, repairing and replacing parts may be a cost-effective method of extending the life and lowering expenses. Due to the nature of the item, some components may wear out quicker than others; but, if correctly handled, they can be changed in a timely manner to minimize difficulties or overheating. Consider centrifuges, filtration systems, and microscope lenses: they can all be replaced without having to dispose of the entire unit.

It is a good idea to have a simple domestic checklist for the lab to remind employees of the daily activities that must be completed, such as cleaning and disinfecting tables, sweeping floors, and disinfecting the most frequent contact areas.

Before beginning any project, you should also double-check the state and quality of PPE; it should be maintained, thus it is essential to underline this issue. Check the eye and facial protection, gloves, boots, and hearing protection equipment routinely for wear.

Find out more about lab equipment malaysia.

hf lifestyle

Embarking on a Medical Science Programme in Malaysia: Advantages and Benefits

In Malaysia, pursuing a medical science programme opens doors to a world of opportunities and advancements in the healthcare sector. Aspiring medical professionals are offered a diverse range of specialised courses that cater to various disciplines within the medical field. In this article, we will explore the usage, advantages, and benefits of enrolling in a medical science programme with RCSI & UCD Malaysia.

The Usage of Medical Science Programmes in Malaysia

Medical science programmes in Malaysia are designed to provide comprehensive training and education to students interested in various healthcare professions. These programmes cover a wide array of disciplines, such as medicine, nursing, pharmacy, biomedical sciences, and more. Students can choose their areas of interest and tailor their studies to align with their career goals.

The Usage of such programmes extends beyond theoretical knowledge. Students undergo practical training in state-of-the-art laboratories and gain real-world experience through internships at renowned medical institutions. The curriculum is carefully crafted to ensure students develop critical thinking, problem-solving, and communication skills, essential for excelling in the medical field.

Advantages of Pursuing a Medical Science Programme in Malaysia

Diverse Specializations:

One significant advantage of medical science programmes in Malaysia is the diverse range of specializations available. Whether students are interested in becoming doctors, pharmacists, medical laboratory technologists, or other healthcare professionals, there is a suitable programme to cater to their interests and aspirations.

High-Quality Education:

Malaysia boasts some of the best universities and colleges with exceptional medical science programmes. These institutions are equipped with modern facilities, advanced technologies, and experienced faculty, ensuring students receive high-quality education and training.

RCSI & UCD Malaysia
RCSI & UCD Malaysia

International Recognition:

Many medical science programmes in Malaysia are internationally recognized, making it easier for graduates to pursue further studies or practice their profession abroad. This global recognition enhances career prospects and opens up opportunities for international collaborations.

Affordable Tuition Fees:

Compared to some Western countries, Malaysia offers more affordable tuition fees for medical science programmes. This affordability, without compromising on the quality of education, makes studying in Malaysia an attractive option for both local and international students.

Benefits of Pursuing a Medical Science Programme in Malaysia

Fulfilling Career Opportunities:

With Malaysia’s growing healthcare industry, graduates of medical science programmes are presented with a myriad of fulfilling career opportunities. From working in public or private hospitals to research institutions and pharmaceutical companies, the demand for qualified healthcare professionals is ever-increasing.

Contributing to Society’s Well-being:

Medical professionals play a crucial role in improving society’s health and well-being. By pursuing a medical science programme, students have the opportunity to make a positive impact on the lives of individuals and communities, contributing to a healthier nation.

Job Stability and Security:

The medical field offers excellent job stability and security. The demand for healthcare services remains constant, ensuring graduates of medical science programmes are less susceptible to economic fluctuations and job uncertainties.


Enrolling in a medical science programme in Malaysia offers a gateway to a rewarding and fulfilling career in the healthcare sector. With diverse specializations, high-quality education, and numerous career opportunities, aspiring medical professionals can find their niche and contribute to the betterment of society. Moreover, the international recognition of these programmes opens doors to global prospects and collaborations. So, if you’re passionate about making a difference in people’s lives and are dedicated to the field of medicine, consider embarking on a medical science programme in Malaysia – a journey that will lead you to a prosperous and impactful future.…

view more

Everything You Need to Know About Lab Supplier and Planner

If you are running a laboratory in Malaysia, you need to ensure that you have the right equipment and supplies to operate efficiently. However, finding the right lab supplier and planner can be a daunting task, especially if you are not familiar with the industry. In this article, we will provide you with an overview of what lab suppliers and planners do, who they are, and why they are essential for your business. View more down below.

What is a Lab Supplier and Planner?

A lab supplier and planner is a company that provides lab equipment, instruments, and supplies to various industries, including healthcare, pharmaceuticals, research and development, and academic institutions. They offer a comprehensive range of products, including laboratory furniture, glassware, chemicals, diagnostic kits, and lab automation systems, among others. Their services also include installation, calibration, and maintenance of laboratory equipment.

Who are Lab Suppliers and Planners?

Lab suppliers and planners are professionals who specialize in providing laboratory solutions to clients. They work with clients to identify their specific needs and recommend the most suitable products and services to meet those needs. They are knowledgeable about the latest trends and technologies in the industry and have a deep understanding of the regulatory requirements that laboratories need to comply with.

view more
view more

Why is Lab Supplier and Planner Essential for Your Business?

Partnering with a reliable lab supplier and planner can help your business in several ways. Here are some of the benefits of working with a lab supplier and planner:

  1. Access to Quality Products: Lab suppliers and planners provide access to a wide range of quality products that are essential for the smooth running of your laboratory. They offer products from reputable manufacturers and ensure that they are of the highest quality standards.
  2. Expert Advice: Lab suppliers and planners have a wealth of knowledge and expertise in the laboratory industry. They can provide expert advice on the most suitable products and services for your laboratory and help you make informed decisions.
  3. Cost Savings: By working with a lab supplier and planner, you can enjoy cost savings on your laboratory purchases. They have established relationships with manufacturers, which allow them to negotiate better prices for their clients.
  4. Efficient Service: Lab suppliers and planners provide a range of services, including installation, calibration, and maintenance of laboratory equipment. This helps ensure that your laboratory equipment is operating at peak efficiency, reducing the risk of downtime and increasing productivity.


In conclusion, partnering with a reliable lab supplier and planner is essential for the success of your laboratory. They provide access to quality products, expert advice, cost savings, and efficient service. When choosing a lab supplier and planner in Malaysia, ensure that you work with a company that has a proven track record, a wide range of products, and excellent customer service. With the right lab supplier and planner, you can ensure that your laboratory runs smoothly and efficiently, helping you achieve your business goals.…

lab supplier Malaysia

Glassware To Equip Your Lab With

Among the essentials that you need from your lab supplier Malaysia, glassware is one of them, without which you won’t be able to perform chemistry experiments or handle chemicals in the first place. There are many types of glassware that are commonly used in laboratories, depending on the scale of their work.


lab supplier Malaysia is rounded

Flasks will likely be the first type that comes to mind when you think of laboratory glassware, chemistry or science in general. A symbolic glassware, it is one of the main containers to handle, mix or heat chemicals. The general characteristic of a flask is its narrow neck and rounded or conical wide body.

One of the most common types of flask is the Erlenmeyer or conical flask, which is the exact image you will have in mind as mentioned earlier. Besides utilizing typical flask functions, it is also used to catch vapor or condensation.

There is also a boiling flask, which sports a flat or round bottom, and true to its namesake, it provides uniform boiling or heating of chemicals. Vapors are also collected inside.

As one more example, your lab would also include a volumetric flask that is made to calibrate and prepare solutions. Sporting a flat bottom, it is practically a giraffe compared to other examples because the neck is longer and narrower too.


Beakers is another common glassware that, like flasks, are also used to store, mix, heat and transfer chemicals. Beakers are cylindrical with flat bottoms and spouts at the lip to assist in pouring. Beakers come in different sizes with varying volume measurement units that you can use to accurately measure your chemicals.

If you are handling caustic or abrasive chemicals, you have to choose beakers that are made of chemical-resistant polypropylene materials. This way, you won’t have to worry much about breakage except when your hands are handling them.

Test tubes

Test tubes are small glassware containers that are cylindrical with u-shaped bottoms and open tops unless you seal them. They perform the same basic functions as other glasswares and can be heated over an open fire. Test tubes are also suitable for experiments involving culturing or performing chemical reactions.

Though they are smaller than beakers and flasks, they still come in different sizes. When you are stocking your lab with test tubes, be sure to buy test tube racks for proper storage, as this is how you keep them stationary in one place.


Rather than mixing or heating chemicals, pipettes are glassware tools that you use to transport liquids or solutions by specific volumes. They can also be used as measurement tools for said chemicals to ensure that you precisely transfer the correct amount.

There are different types and sizes of pipettes you can equip your lab with, such as volumetric or Mohr variants. However, they require regular calibration every three to six months so they can always measure liquids accurately, otherwise your experiment results will turn out wrong in the end as the data is inaccurate.

So note yourself to recalibrate all of your lab’s pipettes every three to six months, and make sure to tell your lab partners to do the same too.…

chemical supplier malaysia

How to choose the right chemical supplier Malaysia

For scientists specialising in chemistry, matters relating to the raw materials used in experiments are of the utmost importance to them. Whether it is the quality of the raw materials, the quantity of the raw materials or anything else, chemists believe that without the right raw materials, equipment and safety facilities, chemical experiments will not be successful and may even endanger their own lives.

Therefore, it is important to choose the right chemical supplier. A qualified chemical supplier Malaysia can make all the difference to the success of your experiments. If you are looking for a suitable chemical supplier Malaysia for your project, for your laboratory, the following article will provide you with some information.

Things to consider when choosing a chemical supplier Malaysia

When you are looking for a chemical supplier, there are a few things that you should pay particular attention to in order to identify them.

The chemicals you need: Different chemical supplier Malaysia will probably provide you with different types of chemicals. Some vendors sell a wide range of chemicals to meet your generalised needs. However, some specific chemicals may only be sold by some vendors.

Size of supplier: If you need fewer types of products, you can usually look for a smaller chemical supplier in your area to meet your needs. This can save your budget. However, if you need more and better products, then a larger chemical supplier Malaysia will be able to meet your needs. They have more workers and better technology to meet your needs, and of course, you will need to pay a larger budget accordingly.

Reputation of the supplier: There is no room for error when it comes to chemicals in experiments. Poor quality chemicals can lead to failed experiments and even put your safety at risk. Therefore, when looking for a chemical supplier Malaysia, a company with a higher reputation is more worth contacting. If a company has a good reputation and many people have given positive reviews, we can assume that this company has a higher quality product.

Cost of the product: The supplier should offer fair and competitive prices. You should also take into account the cost of shipping and handling.

What can be a good chemical supplier bring to you

Experimental success: In chemistry experiments, the choice of chemicals is important. A good quality chemical can make the experiment go smoothly in practice, in data observation and in data recording. Conversely, a bad chemical can lead to a failed experiment and a waste of budget.

Laboratory equipment: In chemistry experiments, people always need a variety of equipment to help them. These chemical instruments are aids to experimentation and they help people to work faster and to carry out more complex tasks. To obtain good laboratory equipment, scientists have to buy it from a qualified checmical supplier. This is the fastest and most efficient way.

Above is some information about chemical supplier Malaysia. If you are wishing to know more about it, you may contact 3D resources for more information.…

Reduce Chemical Exposure in Your Lab With This!

Fume Hood

Chemicals in labs can sometimes be harmful to the people who work there. Because of this, a laboratory needs special equipment, like a fume hood, to keep bad things from happening. A fume hood is a device that keeps the air temperature stable and protects highly acidic chemicals or chemical solutions. There are many good things about having a fume hood. But what is a fume hood? How is it taken care of? Look at the review below.

What’s the function of a fume hood?

Those of you who are new to working in laboratories probably don’t know what the fume hood is for. The main job of the fume hood is to move dangerous chemicals, especially those with a lot of acids, to a place where the risks are less. The process of evaporation is how to cut down on it.

The fume hood is not only used to move chemical reactions from one place to another but also to store chemicals. In this case, the chemicals are either liquids, solutions, or solids that are very acidic. With the fume hood, people working in the lab can do their jobs safely and in comfort. Because it is not unusual for chemicals with a lot of acids to be dangerous. In fact, when some chemicals mix, they can cause explosions.

Different kinds of fume hoods and their parts

Based on how they work, fume hoods can be either ducting or ductless. In reality, they both work the same way. The air that comes in through the front of the cabinet (the door in this case) will be pushed through a blower to the filter material. Another part that is no less important is the lighting equipment consisting of fluorescent lamps. Usually, the door is made of strong, long-lasting materials like special glass or acrylic.

In the past, fume hoods were made of wood with epoxy powder and coated plates. But as technology changes, the shape of the fume hood will change again and again. With a special glass on the front. On the inside, fiberglass-reinforced polyester (FRP), stainless steel, and other special materials are used to make the fume hood.

The fume hood’s front can be opened and changed as needed. It’s possible that this will cause the air in the room to mix with the air in the lab. To fix this, the next step is to move air from a dangerous spot to a safer one.

Fume Hood

How to use a fume hood:

There are a few things you need to watch out for when using a fume hood. Taking into account that the fume hood can be dangerous if it is not taken care of properly. Especially by people who work in the lab. When you use a fume hood, you need to think about the following:

First, pay close attention to how the air moves. To keep the fume hood working well, it is very important to let air flow through it. You can check the air circulation every now and then. If any damage occurs, you should immediately repair it and the materials used in the fume hood are chemical-resistant.

The second thing is that you should also pay attention to the chemical parts. Even more so when choosing this material for the fume hood. Make sure the parts can handle organic chemicals, chemicals with corrosive properties like acids and bases, and chemical reactions that can cause explosions.

Complete your Laboratory with Fume Hood Malaysia here.…

lab furniture malaysia.

When it comes to selecting lab furniture, there are a few things to keep in mind.

The elements of the laboratory’s furnishings are dictated by the materials and equipment to be employed in the survey phase of the project. When designing a laboratory, several factors must be considered: the flowchart and equipment used, the tests performed, the goods utilized in the laboratory, and the materials used in the laboratory’s construction (which are chosen based on the user’s demands and operations). When it comes to lab furniture in Malaysia, you can get the best bargains.

lab furniture malaysia.

For You: Cabinets and More

Tables and file cabinets, as well as sample and reagent storage cabinets, should be noted. Before selecting furniture that meets the customer’s needs, it’s also critical to study each laboratory’s demands and operations, always with the utmost ergonomics, safety, and practicality in mind.

  • The most popular bench types in a laboratory are side and centre benches, which can be placed next to a wall or anywhere else in the room. Each of the bench’s four corners is a potential access point. A centre bench could also be connected to a side bench.There are three points of entrance in this scenario. Mobile Modules are caster-mounted modules that can be moved around.
  • Work benches with doors and drawer modules, as well as a top that is appropriate for the materials being handled, are required for the physical aspects of the laboratory. This facility must have an exhaust gas hood for handling chemical compounds, as well as exhaust hoods and captors, a reagent cabinet, a shower, and emergency eyewash.

Are you planning to renovate your kitchen or build a new home and need furniture to go with it?

Keep in mind that the layout and furnishings you select will have the greatest impact on the ultimate outcome of your kitchen design.

Only if you combine function and style in your kitchen will it be fantastic. So, here are some suggestions to assist you in selecting the greatest kitchen furniture for your needs without losing design or comfort, and without going broke.

The accessibility of our kitchen’s numerous components, such the need for adequate workspace, must also be considered.

The work triangle rule, which states that the movement between the oven, refrigerator, and sink should follow a parallel line, is one of the most prominent furniture distribution rules. The best kitchen layouts to use this rule to are “I” and “L” shaped kitchen layouts.

While it’s true that distribution is important, we also need to consider how accessible each item is to us when choosing kitchen furniture. What does it exactly mean to you?

Let us take a moment to consider our own stature.

This seemingly minor issue has the potential to significantly affect our perception of the relevance of furniture’s bottom and upper sections. It’s vital to remember that bending over can be really unpleasant, especially as we get older. In this sense, selecting kitchen furniture that will make your life easier is critical.
For more information please checkout lab furniture malaysia.